* 3632



* 제품상세보기

* Model 3632 Compression Donut Load Cell, Range of 25,000 lb, 50,000 lb & 100,000 lb, ±0.25% full scale Accuracy, Compact Carbon Steel Column Construction

- Model 3632 Compression Donut Load Cell features a smooth thru-hole design for use in applications which require the load structure to pass through the cell. The hollow load cells are available for compression only loads in capacities of 25,000 lb, 50,000 lb and 100,000 lb. For optimum performance, this load cell must be mounted between load surfaces which are flat and parallel.

첨부 파일 :

* D



* 제품상세보기

* Model D Thru-Hole Load Cell, Range of 150 g to 30,000 lb, ±1.0% full scale Accuracy, Compression only, Stainless Steel

- The Model D Donut Shaped Load Cell features a smooth thru-hole design often ideal for applications which require the load structure to pass directly through the cell. Such applications include bolt force measurements, clamping forces, and monitoring overloads. Load ranges as low as 150 grams and as great as 30,000 lbs can be measured within a maximum full scale accuracy of ±1.0 %. These models are used in compression applications and are available in multiple hole and frame sizes. For optimum performance, these cells must be mounted between load surfaces which are flat and parallel. The Model D miniature load cell is designed to have a minimum thickness.

첨부 파일 :

* TH



* 제품상세보기

* Model TH Thru-Hole Load Cell, Range of 15,000 lb to 200,000 lb, ±0.40% full scale Accuracy, Compact Column Construction, Stainless Steel

- Model TH Donut Shaped Load Cell features a smooth thru-hole design for use in applications which require the load structure to pass through the cell. Such applications include bolt force measurement, post or leg mount, and rolling mill systems. Load ranges as low as 15,000 pounds and as great as 200,000 pounds can be measured within a maximum full scale non-linearity of ±0.25. This model is used in compression applications. For optimum performance, this load cell must be mounted between load surfaces which are flat and parallel. The Model TH Donut Shaped Load Cell is designed to provide the customer with an internal hole diameter which is large relative to the outside diameter. The Model TH is a small size, high capacity load cell.

첨부 파일 :

* MPB



* 제품상세보기

* Model 3719 Bolt and Engine Mount Force Sensor, Compact and High Output, Insensitive to Bolt and Nut Applied Torque

- The bolt force sensor is another unique transducer which is essentially a hollow-compression strain gage load cell. It is designed to be used with most strain gage indicators. The bolt force sensor is a three-piece assembly consisting of: 1. a large hardened and ground flat washer with one side beveled 2. the sensor 3. a small hardened and ground washer. The three pieces are assembled for various applications. The large washer isolates the sensor from the force application tool. The beveled hole in this washer, which always faces away from the sensor, provides clearance for the bolt head radius. When a torque wrench is used, a torque vs. clamp force curve can be generated. The 3719 bolt force sensor is designed for use in fastener testing where the compression loading of the sensor is induced by the tensile loading of the fastener. The bolt force sensor must be used with the size fastener for which it was designed.

첨부 파일 :