* 13



* 제품상세보기

- Model 13 Subminiature Load Cell, ±0.8% full scale accuracy, Range of 150 g to 1,000 lb, Stainless Steel, Single Diaphragm Design

- Model 34 precision miniature load cells measure both tension and compression load forces of 50 g to 1,000 lb. These models are our highest accuracy, rugged miniature load cells. Model 34’s welded, stainless steel construction is designed to eliminate or reduce to a minimum, the effects of off-axis loads. (The internal construction assures excellent long-term stability for ranges 1000 grams and above.) A modification permits this model to be completely welded for underwater applications. The Model 34 tension/compression load cell has female threads attachments. High accuracies of 0.25 % to 0.30 % full scale are achieved. Each bonded strain gage unit is built of welded 17-4 PH stainless steel for additional ruggedness. All load cells with ranges from 1 kg to 10 lb have an electrical balance module in the lead wire (approximately 1 in x .087 in thick). This balance module does not have to be the same temperature as the transducer.

첨부 파일 :

* LFH-7I



* 제품상세보기

- Model LFH-7I (Top Hat) Subminiature Load Cell, Range of 250 lb to 10,000 lb, ±0.7% full scale Accuracy, Stainless Steel Column Construction

- Model LFH-7I subminiature load cell is a low profile force transducer for applications with minimal space and high capacity requirements. This transducer utilizes foil strain gages to measure compression loads of up to 10,000 lb and achieves accuracy of ±0.7% full scale. The top of the load cell is the area where the force is applied and the base ring of the load cell must be placed on a hard, machine-ground flat surface to obtain optimum accuracy.

첨부 파일 :