JCA 오토노머스 주식회사

INNOVA

PWM 16

* 제품상세보기

- PWM 16 is a compact intelligent valve controller capable of controlling up to 16 proportional valve functions, as well as pressure sensor monitoring. The unit is designed for mounting in oil-filled compensated enclosures, and pressure rated to 3000msw.

- 16 x 24V PWM or on/off function 2A
- 6 x analogu e inpu ts 4-20m A 10 b it resolution
- 4 x isolated digital inputs 24V
- "Do All" function that read and write all I/O in one command
- Size : 87 x 112 x 21 mm
- Housing : Aluminum Cover
- Pressure tolerance : 300 bar/3000m water depth

첨부 파일 :

4 Channel Power Controller Board

* CUTE Series

* 제품상세보기

- The 4 channel Power Controller board provides power switching to 4 separate power outputs. Communication is by RS232 or RS485.

- Power supply voltage : 12VDC
- Current consumption (excluding external loads) : 150mA
- Load voltage range : 12 - 48 VDC
- Size : 160x100x20mm (LxWxH)

첨부 파일 :

10 Channel Power Controller Board

* CUTE Series

* 제품상세보기

- The 10 channel Power Controller board provides power switching to 10 separate power outputs. Communication is by RS232 or RS485.

- Power supply voltage : 12VDC
- Current consumption (excluding external loads) : 150mA
- Load voltage range : 12 - 24 VDC
- Size : 160x100x20mm (LxWxH)

첨부 파일 :

Camera Control

* CUTE Series

* 제품상세보기

- The camera controller board is designed to provide necessary functionality to control 4 cameras and lights used in subsea intervention systems.
The board has analogue outputs for light control, controllable power outputs for camera power, motor driver outputs suitable for camera functions (Zoom/Focus) and water alarm input. It is also fitted with a 4 to 1 video multiplexer and drivers for controlling 4 external relays (typically light relays). The camera power outputs are fitted with electronic resettable fuses. Relays are provided for camera outputs (power and zoom/focus) to be able to isolate the outputs in case of water leakage in external camera cables. Remote control is possible via RS232 or multi drop RS484 communication. Several units can be controlled over a single RS485 network.

- Power Supply : 12VDC, 12VDC or 24VDC for camera power
- Configurable power-up state
- Size : 160 x 100 x 12 mm
- Power, Serial & Water Alarm : Pheonix MC 1,5/10-ST-3, 81 connector
- Cameras : Phoenix MC1,5/6-ST-3, 81 connector

첨부 파일 :

Communication Distribution

* CUTE Series

* 제품상세보기

- The communication distribution board connects galvanic isolated RS485 networks together and makes them accessible to a master. Communication to master system can be either RS232 or RS485

- Power Supply: 12VDC (24VDC Optional)
- Maximum communication speed: 115kbps
- Size : 160 x 100 x 12 mm

첨부 파일 :

Insulation measurement

* CUTE Series

* 제품상세보기

- The insulation measurement board will measure the insulation resistance between a low voltage DC (24VDC) powered system and protective earth. Measurement is done by a low current DC signal, in principle as an Ohm-meter. The insulation board can be supplied with 1 or 2 channels for measurement of up to 2 separate (galvanic isolated) powered systems. The output is voltage corresponds to the leakage resistance between the DC powered system and protective earth.

- Power Supply: 24VDC (12VDC Optional)
- Size : 100 x 160 x 12 mm

첨부 파일 :

* CUTE Series

* 제품상세보기

- The I/O controller board is designed to provide a number of I/O’s often required in subsea intervention control systems. The board has 12 analogue inputs, 4 configured for 0-20mA input and 8 configured for 0-10V input. Other combinations of current / voltage inputs can be accomplished by altering resistor values on the board. The unit has also 8 opto isolated digital inputs, relay drivers for 8 external relays, 8 onboard relays (typically for controlling power to sensors) and water alarm. Remote control is possible via RS232 or multi drop RS485 communication.

첨부 파일 :

수중.해양산업

INNOVA