JCA 오토노머스 주식회사

Reaction

Flanged 2102

* 2102

* 제품상세보기

Model 2102 small flanged reaction torque sensor is designed for installation between test pieces such as motors, switches, axles, or shafts and their mounting plate. These models operate and are calibrated in both clockwise and counterclockwise directions. Nickel-plated alloy steel construction enhances durability in harsh, industrial environments. These models have no moving parts and utilize four bonded strain gages on a special machined portion of the transducer to achieve a maximum non-linearity of 0.1% over a wide dynamic range. Typical applications include tire braking, motor dynamometers, friction-skid testing, and twist measurement. 50 in-lb to 1,000 in-lb capacities.

첨부 파일 :

Flanged 2110

* 2110 *Model 2110 Series Flanged Reaction Torque Sensor, 2,000 lb-in to 2,400,000 lb-in, 0.1 % Non-linearity and Hysteresis

* 제품상세보기

Model 2110 Series Flanged Reaction Torque Sensor, 2,000 lb-in to 2,400,000 lb-in, 0.1 % Non-linearity and Hysteresis, High Torsional Stiffness, Higher Resistance to Bending Moments. Model 2110-2116 flanged reaction torque sensor is designed for installation between test pieces such as motors, switches, axles, or shafts and their mounting plate. These models operate and are calibrated in both directions. Nickel-plated alloy steel construction enhances durability in harsh, industrial environments. These models have no moving parts and utilize four bonded strain gages on a special machined portion of the transducer to achieve a maximum non-linearity of 0.1% over a wide dynamic range. Typical applications include tire braking, motor dynamometers, friction-skid testing, and twist measurement. 2,000 in-lb to 2,400,000 in-lb capacities.

첨부 파일 :

Flanged QFFH-9

* QFFH-9 * Model QFFH-9 Flange Type Reaction Torque Transducer, 3,000 in-lb to 24,000 in-lb, maximum non-linearity of 0.1%, Stainless Steel

* 제품상세보기

Model QFFH-9 Flange Type Reaction Torque Transducer, 3,000 in-lb to 24,000 in-lb, 0.1 % Non-linearity and Hysteresis, Wide Dynamic Range, High Frequency Response. Model QFFH-9 flange reaction torque transducer is designed for installation between test pieces such as motors, switches, axles or shafts and their mounting plate. These models operate and are calibrated in both directions. Stainless steel construction enhances durability in harsh, industrial environments. These models have no moving parts and utilize four bonded strain gages on a special machined portion of the transducer to achieve a maximum non-linearity of 0.1% over a wide dynamic range. Typical applications include tire braking, motor dynamometers, friction-skid testing, and twist measurement.

첨부 파일 :

Miniature 2105

* 2105 * Model 2105 Low Capacity Reaction Torque Sensor, 50 oz-in to 1,000 oz-in, maximum non-linearity of 0.1%, flange / shaft configuration

* 제품상세보기

Model 2105 low capacity flange/shaft reaction torque sensor is designed for installation between test pieces such as motors, switches, axles, or shafts and their mounting plate. These models operate and are calibrated in both directions. These models have no moving parts and utilize four bonded strain gages on a special machined portion of the transducer to achieve a maximum non-linearity of 0.1% over a wide dynamic range. Typical applications include tire braking, motor dynamometers, friction-skid testing, and twist measurement. 50 in-oz to 1,000 in-oz capacities.

첨부 파일 :

Miniature QWFK-8M

* QWFK-8M * Model QWFK-8M Miniature Reaction Torque Transducer, 25 in-oz to 250 in-oz, 50 in-lb to 300 in-lb, maximum non-linearity of 0.1%, Compact, Stainless Steel

* 제품상세보기

Models QWFK-8M miniature reaction torque transducers is engineered for minimum size and to achieve 0.1% maximum non-linearity. Four bonded strain gages are positioned on a special machined portion of the transducer to effectively measure even slight torque motion. These models operate and are calibrated in both directions. A modular, stainless steel construction and no moving parts provide excellent durability under harsh industrial conditions. Potential miniature reaction torque transducer applications include motor dynamometer, tire braking, twist measurement, and friction-skid test measurements. Compact Size, High Frequency Response

첨부 파일 :

Shaft 2120 Low

* 2120 Low * Model 2120 Low Shaft Reaction Torque Sensor, 50 oz-in to 1,000 oz-in, 0.1 % Non-linearity and Hysteresis

* 제품상세보기

Model 2120 Shaft Reaction Torque Sensor, 50 oz-in to 1,000 oz-in, 0.1 % Non-linearity and Hysteresis, Low-end Sensitivity, No Maintenance of Slip Rings, Bearings, or Brushes. Model 2120 shaft reaction torque sensor is designed for installation between test pieces such as motors, switches, axles, or shafts and their mounting plate. These models operate and are calibrated in both directions. Nickel-plated alloy steel enhances durability in harsh, industrial environments. These models have no moving parts and utilize four bonded strain gages on a special machined portion of the transducer to achieve a maximum non-linearity of 0.1% over a wide dynamic range. Typical applications include tire braking, motor dynamometers, friction-skid testing, and twist measurement. 50 in-oz to 1,000 in-oz capacities.

첨부 파일 :

Miniature QWLC-8M

* QWLC-8M * Model QWLC-8M Miniature Reaction Torque Transducer, 25 in-oz to 250 in-oz, 50 in-lb to 300 in-lb, maximum non-linearity of 0.1%, Compact, Stainless Steel

* 제품상세보기

Model QWLC-8M miniature reaction torque transducer is are engineered for minimum size and to achieve 0.1% maximum non-linearity. Four bonded strain gages are positioned on a special machined portion of the transducer to effectively measure even slight torque motion. These models operate and are calibrated in both directions. A modular, stainless steel construction and no moving parts provide excellent durability under harsh industrial conditions. Potential miniature reaction torque transducer applications include motor dynamometer, tire braking, twist measurement, and friction-skid test measurements. Compact Size, High Frequency Response

첨부 파일 :

Shaft 2120

* 2120 Low
* Model 2120 Series Shaft Reaction Torque Sensor, 100 lb-in to 500,000 lb-in, 0.1 % Non-linearity and Hysteresis

* 제품상세보기

Model 2120 Series Shaft Reaction Torque Sensor, 100 lb-in to 500,000 lb-in, 0.1 % non-linearity and hysteresis, Reduced Friction Error, Low-end Sensitivity, No maintenance of Slip Rings, Bearings, or Brushes. Model 2121-2126 shaft reaction torque sensor is designed for installation between test pieces such as motors, switches, axles, or shafts and their mounting plate. These models operate and are calibrated in both directions. Nickel-plated alloy steel construction enhances durability in harsh, industrial environments. These models have no moving parts and utilize four bonded strain gages on a special machined portion of the transducer to achieve a maximum non-linearity of 0.1% over a wide dynamic range. Typical applications include tire braking, motor dynamometers, friction-skid testing, and twist measurement. 100 in-lb to 500K in-lb capacities.

첨부 파일 :

Shaft QSFK-9

* QSFK-9
* Model QSFK-9 Shaft Type Reaction Torque Transducer, 100 in-lb to 24,000 in-lb, maximum non-linearity of 0.1%, stainless steel

* 제품상세보기

Model QSFK-9 shaft reaction torque transducer is designed for installation between test pieces such as motors, switches, axles or shafts and their mounting plate. These models operate and are calibrated in both directions. Stainless steel construction enhances durability in harsh, industrial environments. These models have no moving parts and utilize four bonded strain gages on a special machined portion of the transducer to achieve a maximum non-linearity of 0.1% over a wide dynamic range. Typical applications include tire braking, motor dynamometers, friction-skid testing, and twist measurement.

첨부 파일 :

Square Drive 2133-300

* 2133-300
* Model 2133-300 Reaction Socket Torque Sensor, 10 lb-ft to 1,000 lb-ft, 0.25 % Non-linearity and Hysteresis, Square Drive Configuration

* 제품상세보기

Model 2133-300 Reaction Socket Torque Sensor, 10 lb-ft to 1,000 lb-ft, 0.25 % Non-linearity and Hysteresis, Adaptable for Portable Usage, No Special Adapter Tools Required. These cost-efficient sensors are primarily used in torque wrench calibration applications. Socket-wrench torque monitoring may be performed by the Model 2133-300 series. Also, may be used in a production line/assembly line stall nutrunner set-up and calibration.

첨부 파일 :

Torque - Thrust 6400

* 6400
* Model 6400 Series Torque Thrust Transducer, 900 lb-in/1500 lb to 100K lb-in/200K lb, 0.15 % Non-linearity and Hysteresis

* 제품상세보기

Model 6400 Series Torque Thrust Transducer, 900 lb-in/1500 lb to 100K lb-in/200K lb, 0.15 % Non-linearity and Hysteresis, Reduced Crosstalk, Extraneous Load Resistance. Models 6459 and 6467-6470 torque thrust transducers are used in applications where the need to sense both torque and thrust parameters simulteaneously. Nickel-plated, alloy steel, one-piece construction. Designed specifically to provide the strength and rigidity required to withstand extraneous loads and bending moments. Unique construction provides both maximum structure life and minimum thrust/torque crosstalk.

첨부 파일 :

Torque Watch 366

* 366
* Model 366 Low Range Reaction Torque Watch Gauge, from 0.2 g-cm to 42 g-cm Accuracy: 0.06 oz-in to 0.6 oz-in, 6 g-cm to 42 g-cm ( +/- 5% ), 0.01 oz-in to 0.1 oz-in, 0.003 oz-in to 0.03 oz-in, 1 g-cm to 7.5 g-cm, 0.2 g-cm to 2 g-cm ( +/- 10 % )

* 제품상세보기

The 366 low range torque watch gage series accurately measures very low torque. Three miniature adapter chucks allow simple coupling to the device being measured. To minimize friction, a calibrated spring, shaft, and pointer assembly are mounted in jeweled bearings. The unit can measure torque in either a clockwise or counterclockwise direction. A stainless steel internal rotation stop helps prevent damage from over-torque up to three times the normal range.

첨부 파일 :

Torque Watch 651

* 651
* Model 651 Mid Range Reaction Torque Watch Gauge, 2.8 gm-cm to 2,800 gm-cm Accuracy: +/- 2%

* 제품상세보기

The 651 mid-range torque watch gage series provides accurate measurement of low static torque. A 1/4 inch keyed chuck provides a simple means of coupling to the device under measurement. The 651 Series utilizes a calibrated spring, shaft, and pointer assembly within a rugged steel and aluminum housing. The unit can measure torque in either a clockwise or counterclockwise direction. Internal stainless steel rotation stops help prevent damage from over-torque up to two times the normal range

첨부 파일 :

Torque Watch 940

* 940
* Model 940 High Range Reaction Torque Watch Gaguge, 0.1 Nm to 1.4 Nm Accuracy: +/- 2%

* 제품상세보기

The 940 high-range torque watch gage series accurately measures high range torque. A 3/8 inch keyed chuck and a 3/8 inch square socket driver adaptor provides a simple means of coupling to the device under measurement. The 940 Series utilizes a calibrated spring, shaft, and pointer assembly within a rugged steel and aluminum housing. The unit can measure torque in either a clockwise or counterclockwise direction. Internal stainless steel rotation stops help prevent damage from over-torque up to two times the normal range.

첨부 파일 :

Special Configuration 2404

* 2404
* Model 2404 Hollow Reaction Torque Sensor, 50 lb-in to 5K lb-in, 0.1 % Non-linearity and Hysteresis,

* 제품상세보기

Model 2404 hollow reaction torque sensor is designed for housing reaction force measurement in mixing, hydraulic pump, and motor test applications. These models operate and are calibrated in both directions. Nickel-plated alloy steel construction enhances durability in harsh, industrial environments. These models have no moving parts and utilize four bonded strain gages on a special machined portion of the transducer to achieve a maximum non-linearity of 0.1% over a wide dynamic range. 50 in-lb to 5,000 in-lb capacities.

첨부 파일 :

Special Configuration 2320

* 2320
* Model 2320 Flanged Reaction Torque Sensor, 12,000 lb-in to 36,000 lb-in, 0.1 % Non-linearity and Hysteresis

* 제품상세보기

Model 2320 hollow reaction torque sensor is designed for housing reaction force measurement in mixing, hydraulic pump, and motor test applications. These models operate and are calibrated in both directions. Nickel-plated alloy steel construction enhances durability in harsh, industrial environments. These models have no moving parts and utilize four bonded strain gages on a special machined portion of the transducer to achieve a maximum non-linearity of 0.1% over a wide dynamic range. 12,000 in-lb to 36,000 in-lb capacities.

첨부 파일 :

일반산업

Reaction