* 34



* 제품상세보기

- Model 34 Miniature Load Cell, ±0.25% & ±0.30% full scale accuracy, Range of 50 g to 1,000 lb, Stainless Steel, Rugged Double Diaphragm Design for 100 lbs & below, Single Diaphragm Design above 100 lb. Female thread attachments.

- Model 34 precision miniature load cells measure both tension and compression load forces of 50 g to 1,000 lb. These models are our highest accuracy, rugged miniature load cells. Model 34’s welded, stainless steel construction is designed to eliminate or reduce to a minimum, the effects of off-axis loads. (The internal construction assures excellent long-term stability for ranges 1000 grams and above.) A modification permits this model to be completely welded for underwater applications. The Model 34 tension/compression load cell has female threads attachments. High accuracies of 0.25 % to 0.30 % full scale are achieved. Each bonded strain gage unit is built of welded 17-4 PH stainless steel for additional ruggedness. All load cells with ranges from 1 kg to 10 lb have an electrical balance module in the lead wire (approximately 1 in x .087 in thick). This balance module does not have to be the same temperature as the transducer.

첨부 파일 :

* 53



* 제품상세보기

- Model 53 Low Cost Load Cell, ±0.6% full scale accuracy, Range of 5 lb to 50,000 lb, Stainless Steel Diaphragm Design, Miniature footprint

- Model 53 load cells are bonded foil strain gage transducers designed for cost efficient production and testing applications (i.e. press calibration). Engineered compression force measurements up to 50,000 lb., this model achieves a maximum non-linearity of 0.25% full scale. Precision gauging techniques and a stainless steel construction provides excellent long-term stability and reliability under severe operating conditions. The Model 53 compression-only load cell has an integral load button machined as part of the load cell. The Model 53 must be mounted on a smooth flat surface for proper operation. Three tapped holes are provided for mounting.

첨부 파일 :